Scan - More Features
Xerox 6204 Wide Format Solution 85
Scan
4
Scan - More Features
You can configure items such as scanned image size and the scan start position on the
[More Features] screen. For more information, refer to the following parts of this
section:
Scan Size (Specifying the Scan Size)......................................................................................... 85
Edge Erase (Erasing Edges and Margin Shadows of the Original)............................................ 86
Scan Start Position (Shifting the Start Position for Scanning the Original)............................... 86
Mirror Image (Scanning Images Reversed) ............................................................................... 87
Invert Image (Scanning with Inverted Images).......................................................................... 88
1 Press the <Scan> button, or select [Scan] on the [Menu] screen.
2 Select the [More Features] tab, and configure each feature.
Scan Size (Specifying the Scan Size)
You can set the size for the original to be scanned.
1 Select [Scan Size].
2 Select the size.
Auto Detect
Original sizes are automatically detected.
Custom Size
You can set custom sizes in advance that you will
use frequently in the System Settings feature and
then select a desired size from the custom sizes
you have set.
For more information about how to set the custom sizes to
be displayed, refer to "Custom Size Buttons" (P.142).
Variable Size
You can set the width in the range 100 to 1230
mm , and the height in the range 100 to 914 mm,
in 1 mm increments.
3 Select [Save].
To Next Page
Loading...
Need help?
General
