6 Computer Operations
106
Computer Operations
6
Printing
The following describes the print procedures.
Using the Print Driver
In order to print from your computer, a print driver must be installed on the computer.
The print driver is software that converts print and print command data from your
computer into forms usable by the machine.
For instructions on installing the print driver, refer to the manual contained in the CD-ROM that is
provided with the machine.
The main features available on the print driver are as follows:
To learn about print features, click on [Help] in the print driver screen and refer to the print driver online
help.
Reduce / Enlarge
Specifies the copy ratio for the document.
Synchronized Cut
Selects the method to cut the roll media.
Multiple Up
Prints multiple pages onto 1 sheet of paper media.
Preview
Confirms the image on the preview screen before printing.
Print to file
Creates TIFF files without printing.
This is the procedure to follow when using the print driver:
Note • The printing procedure may vary depending on the application software you are using.
For details, refer to the manual for each application.
1 Select [Print] from the application's [File] menu.
2 Confirm [Printer Name] and click [Properties] if necessary.
To Next Page
Loading...
Need help?
General
