Size Series Settings for Originals
Xerox 6204 Wide Format Solution 31
Product Overview
2
Size Series Settings for Originals
Select the required size series for original size detection from [ISO A size series], [JIS
B size series], [ISO B size series], [SP. A-1 series] [SP. A-2 series], [Arch-1 series],
[Arch-2 series], and [ANSI series]. Be sure to change the original size series when
loading an original that differs from the set size series.
The factory default setting is [ISO A size series].
1 Press the < Original / Media Settings> button.
2 Select the required original size series.
Original Size Series
The following are the original size series.
3 Select [Close].
Size Series Original Size
ISO A series A0, A1, A2, A3, A4
JIS B series JIS B1, JIS B2, JIS B3, JIS B4, JIS B5
ISO B series ISO B1, ISO B2, ISO B3, ISO B4, ISO B5
SP.A-1 series 880x1, 230mm, 620x871mm, 440x625mm,
A3, A4
SP.A-2 series 860x1,210mm, 620x871mm, A2, A3, A4
Arch-1 series 36x48", 24x36", 18x24", 12x18", 9x12"
Arch-2 series 30x42", 24x36", 18x24", 12x18", 9x12"
ANSI series 34x44", 22x34", 17x22", 11x17", 8.5x11"
Scan
<Original / Media Settings> button
To Next Page
Loading...
Need help?
General
