Xerox 6204 - Page 16

1 Before Using the Machine
8 Xerox 6204 Wide Format Solution
Before Using the Machine
1
O
pera
t
or
A
ccess
ibl
e
A
reas
This equipment has been designed to restrict operator access to safe areas only.
Operator access to hazardous areas is restricted with covers or guards, which
would require a tool to remove. Never remove these covers or guards.
Maintenance
Any operator product maintenance procedures will be described in the user
documentation supplied with the product. Do not carry out any maintenance on
this product which is not described in the customer documentation.
Cleaning Your Product
Before cleaning this product, unplug the product from the electrical outlet. Always
use materials specifically designated for this product, as the use of other materials
may result in poor performance and may create a hazardous situation. Do not use
aerosol cleaners, because they may be explosive and flammable under certain
circumstances.
WARNING - Electrical Safety Information
*
Use only the power cord supplied with this equipment.
* Plug the power cord directly into a grounded electrical outlet. Do not use an
extension cord. If you do not know whether or not an outlet is grounded, consult
a qualified electrician.
If this machine needs to be moved to a different location, contact a Xerox service
representative or your authorized local representative or service support
organization.
*
Improper connection of the equipment-grounding conductor can result in
electrical shock.
*
Do not place this equipment where people might step or trip on the power cord.
*
Do not place objects on the power cord.
*
Do not override or disable electrical or mechanical interlocks.
*
Do not obstruct thge ventilation openings.
*
Never push objects of any king into slots or openings on this equipment.
If any of the following conditions occur, switch off the power to the machine
immediately (power switch and circuit breaker) and disconnect the power cord
from the electrical outlet. Call an authorized local service representative to
correct the problem.
- The equipment emits an unusual noise or odor.
- The power cord is damaged or frayed.
- A wall panel circuit breaker, fuse, or other safety device has been tripped.
- Liquid is spilled into the copier/printer.
- The equipment is exposed to water.
- Any part of the equipment is damaged.