DocuColor 5000 User Guide
5-11
5. Problem solving
NOTE: Occasionally a sheet of paper wraps around the heat roll.
(The heat roll is visible when handle 4d is up). DO NOT
attempt to
remove this sheet of paper because the stripper fingers may be
damaged if you attempt this procedure. Call your Xerox service
representative to remove this piece of paper.
9. Reposition green handle 4d and close area 4c. Ensure
these are firmly in place.
10. Grasp handle 4 and slowly push in the Paper Transport until
it stops. Turn the handle in the direction of the arrow to lock
the module in place.
11. Close the Right and Left Front Doors.
12. Follow the instructions on the UI to restart your print job.
To Next Page
Loading...
