DocuColor 5000 User Guide
4-5
4. Accessories
Loading paper
Loading paper in Trays 3 and 4 is the same as it is for Trays 1 and
2; therefore, use the same procedure for loading paper. Refer to
page 3-11 for the procedure.
Paper trays air adjustment
Blowers help control the environmental conditions in the paper
trays to ensure optimum print capability:
• Each paper tray has two blowers. The lead edge blower is on
at all times and produces heated air if one of the following
selections are made: Coated paper, Transparencies, or plain
paper 106 g/m
2
or heavier. The trail edge blower is on at all
times and does not produce heated air.
• The paper trays also have air adjustment levers on the drawer
to regulate the direction of the air. If the paper weight is
between 60 and 256 g/m
2
, the position of the air adjust levers
should be toward the front of the tray. If the paper weight is
between 257 and 300 g/m
2
, the position of the air adjust levers
should be positioned toward the rear of the tray.
Slide the Air Adjustment Levers to accommodate the weight of the
paper loaded. Slide the lever forward for paper between 60 and
256 g/m
2
. For papers between 257 and 300 g/m
2
, slide levers
toward the back of the tray.
To Next Page
Loading...
