Xerox Docucolor 5000 - High Capacity Stacker

DocuColor 5000 User Guide
4-7
4. Accessories
High Capacity Stacker
The High Capacity Stacker (HCS) is an optional finishing device
that provides stacking and offsetting capabilities for output to the
HCS Stacker Tray. The HCS connects to the right side of the
digital press and replaces the Offset Catch Tray.
The HCS Stacker Tray has a capacity of 3500 sheets of 24 lb (90
g/m
2
) centerline paper (or 370 mm high). The HCS Top Tray has a
capacity of 250 sheets of 24 lb 90 gm
2
centerline paper. The HCS
is supplied with two Stacker Carts. If needed, you can purchase an
additional Stacker Cart. Contact your Xerox representative for
further details.
NOTE: The Stacker Tray cannot support more than 99 lb. (45 kg)
of printed material and therefore, cannot hold 3500 sheets of
coated paper (for example SRA3).