Xerox Docucolor 5000 - Tray Stock Mismatch

DocuColor 5000 User Guide
3-13
3. Paper information
Tray Stock Mismatch
If the paper loaded in a tray does not match the information on the
Tray Properties window, the UI alerts you with a Tray Stock Size
Mismatch message.
If you receive this message, do the following:
1. Load the stock indicated on the Tray Stock Size Mismatch
window, or
2. Change the Tray Properties to match the contents of the
tray.
a. Verify the paper size, type (coated, uncoated, etc.),
and weight of the paper loaded in the tray.
b. Enter that information on the Tray Properties window.