DocuColor 5000 User Guide
4-12
4. Accessories
Paper path
.
TIP: Labels must be sent to the HCS Top Tray.
Top Tray
Sheets are transported to the HCS Top Tray:
• When sheets are purged after a paper jam.
• When the Sample Set button is selected.
• When selected as an Output Location.
Stacker Tray
Collated sets are transported to the HCS Stacker Tray.
Bypass
The Bypass transports collated sets through the HCS to a
connected finishing device or to another HCS.
If your system configuration has two High Capacity Stackers, the
bypass on the second HCS is not available.
To Next Page
Loading...
