Xerox Docucolor 5000 - 4 Accessories; Trays 3 and 4 (Second Feeder Module); Identifying the Parts

DocuColor 5000 User Guide
4-1
4. Accessories
Trays 3 and 4 (Second Feeder Module)
The Second Feeder Module is an optional feeding device that
contains Trays 3 and 4. This module holds the same number and
types of substrates as the First Feeder Module (FFM), which
contains Trays 1 and 2. The First Feeder Module is not optional
and is permanently connected to the digital press.
Each tray holds a maximum of 2000 sheets of 24 pound (90 g/m
2
)
paper. Refer to “Paper guidelines” in Chapter 3 on page 3-5 for
more information on using specific types of paper.
NOTE: Always refer to the Recommended Materials List and the
Speciality Media Guide.
Identifying the parts
Second Feeder Module
First Feeder Module