DocuColor 5000 User Guide
2-3
2. Tray Properties
Current tray information
This area of the Tray Properties screen displays the current tray
information including the paper size, type, weight, and orientation
of the paper (LEF or SEF).
Not available for...
This area of the screen displays whether a tray is available for
Auto Tray Switching (ATS) or Auto Paper Selection (APS). The
tray’s availability for either of these features is determined in
System Settings.
Auto Tray Switching
When Auto Tray Switching (ATS) is activated in the System
Settings of the Administrator mode, the digital press automatically
switches to another tray containing paper of the identical size,
weight, type, and feeding orientation (SEF or LEF) when the tray
being used is empty.
Auto Paper Selection
Auto Paper Selection (APS) can be enabled in the System
Settings of the Administrator mode. When enabled, the digital
press automatically selects the paper tray containing the correct
size paper without a specific paper tray being selected.
Refer to page 2-23 of the Administrator Guide for more
information on ATS and APS.
Enable/Disable
This area of the screen allows you to enable or disable a specific
tray for use. If Enable is selected, the paper tray is available for
use by the machine. If Disable is selected, the paper tray is
disabled and is not available for use by the machine.
To Next Page
Loading...
