Xerox Versant 3100 Press - Page 90

a) Remove the feed roll by squeezing the metal shaft at both ends and lifting it up
and out of the tray.
b) Install a new feed roll by squeezing the metal shaft at both ends and sliding it
into place.
4. Remove the nudger roll and install a new one.
a) Remove the nudger roll by squeezing the metal shaft at both ends and lifting
it up and out of the tray.
b) Install a new nudger roll by squeezing the metal shaft at both ends and sliding
it into place.
5. Remove the separator roll and install a new one.
Xerox
®
Versant
®
3100 Press6-14
User Guide
Maintenance