Xerox WorkCentre 7970 System Administrator Guide

Scanning
182 Xerox
®
WorkCentre
®
7970 Multifunction Printer
System Administrator Guide
Configuring Scan To Destination
The Scan To Destination feature allows you to associate scan destinations with address book contacts.
Users can select these contacts when scanning using the Scan To feature.
Before You Begin
• Add at least one contact to the Device Address Book.
• Add scan destinations to address book contacts.
For details, see Address Books on page 235.
Configuring Default Scan Settings
1. In CentreWare Internet Services, click Properties>Services.
2. Click Scan To>Setup.
3. Edit settings as needed. For details, see the Help in CentreWare Internet Services.
Setting the Default Scan To View to Favorites
1. In CentreWare Internet Services, click Properties>Services.
2. Click Scan To>Setup.
3. Click Address Book.
4. To configure the Device Address Book settings stored in the printer, click Edit.
5. To set the default Scan To view at the control panel as Favorites, under Policies, select View
Favorites on Scan To Service Entry.
6. Click Apply.

Xerox WorkCentre 7970 Specifications

General

Print Resolution	1200 x 2400 dpi
Maximum Paper Capacity	5, 140 sheets
Monthly Duty Cycle	Up to 300, 000 pages
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Hard Disk	250 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Print Speed	Up to 70 ppm
Copy Speed	Up to 70 cpm
Connectivity	Ethernet, USB
Processor Speed	1.2 GHz
Memory	2 GB
Scan Type	Color, Black/White
Operating System Compatibility	Windows, Mac, Linux
Weight	217 kg