Xerox WorkCentre 7970 System Administrator Guide

Administrator Tools
246 Xerox
®
WorkCentre
®
7970 Multifunction Printer
System Administrator Guide
Restarting the Printer in CentreWare Internet
Services
1. In CentreWare Internet Services, click Status>Description & Alerts.
2. At the bottom of the page, click Reboot Machine, then click OK.
Notes:
• If your printer is locked, type the system administrator user name and password to access the
Properties tab. The administrator user name is admin and the default password is 1111.
• This procedure causes the printer to restart and be unavailable over the network for several
minutes.
Restarting the Printer at the Control Panel
Using Software Resets to restart the printer is faster and wastes fewer consumables than powering the
printer on and off. Restarting the printer can take up to five minutes during which time CentreWare
Internet Services is not available.
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Troubleshooting.
3. Touch Resets.
4. Touch Software Reset.
5. Under Reset Options, select the type of reset you want:
− All Software
− Network Software
− Copy Software
6. Touch Reset.

Xerox WorkCentre 7970 Specifications

General

Print Resolution	1200 x 2400 dpi
Maximum Paper Capacity	5, 140 sheets
Monthly Duty Cycle	Up to 300, 000 pages
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Hard Disk	250 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Print Speed	Up to 70 ppm
Copy Speed	Up to 70 cpm
Connectivity	Ethernet, USB
Processor Speed	1.2 GHz
Memory	2 GB
Scan Type	Color, Black/White
Operating System Compatibility	Windows, Mac, Linux
Weight	217 kg