Xerox WorkCentre 7970 System Administrator Guide

Security
90 Xerox
®
WorkCentre
®
7970 Multifunction Printer
System Administrator Guide
Enabling FIPS 140 Mode and Checking for Compliance
1. In CentreWare Internet Services, click Properties>Security>Encryption.
2. Click FIPS 140-2.
3. Click Enable.
4. Click Run Configuration Check and Apply.
A pass or fail message appears:
− If the configuration check passes, click Reboot Machine to save and restart the printer.
− If the configuration check fails, the reasons for the failed test list in a table at the bottom of
the page. For each reason, a link is provided. Click the appropriate link to disable the protocol,
replace the certificate, or allow the printer to use the non-compliant protocol.
Note: When FIPS 140 Mode is enabled, only FIPS-compliant certificates can be installed on the
printer.

Xerox WorkCentre 7970 Specifications

General

Print Resolution	1200 x 2400 dpi
Maximum Paper Capacity	5, 140 sheets
Monthly Duty Cycle	Up to 300, 000 pages
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Hard Disk	250 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Print Speed	Up to 70 ppm
Copy Speed	Up to 70 cpm
Connectivity	Ethernet, USB
Processor Speed	1.2 GHz
Memory	2 GB
Scan Type	Color, Black/White
Operating System Compatibility	Windows, Mac, Linux
Weight	217 kg