Xerox WorkCentre 7970 System Administrator Guide

Initial Setup
Xerox
®
WorkCentre
®
7970 Multifunction Printer 23
System Administrator Guide
Installing Optional Software Features
When you purchase an optional software feature, enable it by providing a feature installation key. Some
features come with an activation code that you use to get a feature installation key. Go to the Xerox
®
Software Activation Portal website at www.xeroxlicensing.xerox.com to enter the activation code. The
website generates a feature installation key that you can use to enable the feature.
You can also install optional software features by sending a print file. You can install features on
multiple printers by sending a formatted .csv file as a print job to the printers. A Xerox representative
creates this file and provides installation instructions.
Installing a Software Feature at the Control Panel
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Device Settings>General>Feature Installation.
3. Click Feature Installation.
4. Under Feature Installation Key Entry, type the key.
5. Touch OK.

Xerox WorkCentre 7970 Specifications

General

Print Resolution	1200 x 2400 dpi
Maximum Paper Capacity	5, 140 sheets
Monthly Duty Cycle	Up to 300, 000 pages
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Hard Disk	250 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Print Speed	Up to 70 ppm
Copy Speed	Up to 70 cpm
Connectivity	Ethernet, USB
Processor Speed	1.2 GHz
Memory	2 GB
Scan Type	Color, Black/White
Operating System Compatibility	Windows, Mac, Linux
Weight	217 kg