Customization and Expansion
Xerox
®
WorkCentre
®
7970 Multifunction Printer 255
System Administrator Guide
Auxiliary Interface Kit
An Auxiliary Interface Kit, or a Foreign Device Interface Kit, is a third-party access and accounting device.
These kits, such as a coin operated printer accessory or a card reader, can be attached to the printer.
Installation instructions are included with the Foreign Device Interface Kit.
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Accounting Settings.
3. Touch Accounting Mode>Auxiliary Access.
4. Touch Auxiliary Device Type and select your device type.
5. Touch Save twice.
See also:
Accounting on page 207
Local Authentication on page 70
To Next Page
Loading...
