Xylem SonTek FlowTracker2 - Page 126

SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
125
Step 1
Open Station is performed from the Data Collection
Window. Up to ten completed stations will be
displayed at any time,
a) To select a station,
i). Use the left or right arrow key to scroll through
the completed stations,
b) To open a station,
i). Press the enter key.
c) The software will navigate to the Review Station
screen.
Figure 8:11 - Open Station
Step 2
Review Station screen display summary of the
selected station. The review station allows the user
to review the measurement results before editing is
performed.
a) To EDIT station,
i). Press the Left Soft Key.
b) To close review station or CANCEL edit station,
i). Press the Right Soft Key.
Figure 8:12 - Review Station
Step 3
Edit Station screen allows the user to change
parameters during the original configuration. The
“Edit Station” screen is similar to the “Add Station”
screen.
a) To confirm edit station,
i). Press the Right Soft Key.
b) To CANCEL edit station,
i). Press the Left Soft Key.
Figure 8:13 - Edit Station
Step 4
Confirmation screen request confirmation of
discarding all incompatible point velocity
measurements by the FlowTracker2 handheld
software.
a) To confirm discarding incompatible point velocity
measurements,
i). Press the Right Soft Key.
b) The software will navigate to the Data Collection
Figure 8:14 - Confirmation