SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
41
Template Operating Screen will list all available
templates on the handheld or if there are no
templates available, indicate “Currently there are no
user templates defined – please use the ‘New
Template’ button to create the first template”.
a) To create a new Template,
i). Press the Right Soft Key,
ii). The software will redirect to “New Template”
screen.
b) To navigate to Configuration Menu,
i). Press the Left Soft Key.
Figure 3:6 - Template Operating
Screen
New Template 3.3.2.2
New Template screen displays two parameters that
need to be completed to create a new template,
a) Template Name is user defined. The template
name can be up to 50 characters long.
b) Base Template defines the default
configuration used for new template. The user
has the option to select the default SonTek
configuration or from existing user
configurations.
c) To accept new Template,
i). Press the Right Soft Key,
ii). The software will return to template screen.
d) To CANCEL new Template,
i). Press the Left Soft Key.
Figure 3:7 - New Template
Selecting Template 3.3.2.3
Selecting Template is performed from the template
main screen.
a) To select a Template,
i). Use up or down scroll arrows keys to select the
template,
ii). The template name selected will be highlighted
in yellow,
iii). Press the enter key to access the template
screen.
b) To navigate to Configuration or New Template,
i). Configuration - Press the Left Soft Key
ii). New Template - Press the Right Soft Key
Figure 3:8 - Selecting Template
To Next Page
Loading...