Xylem SonTek FlowTracker2 - 14.8.2.6 Supplemental Data

SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
271
Supplemental Data 14.8.2.6
Figure 14:31. Layout of Supplemental Data Tab
Any supplemental data added during the measurement will appear in the Supplemental
Data tab (Figure 14:31). Multiple supplemental data entries can be available during a
measurement. Supplemental data values are the following:
• Gauge height time – time at which gauge height is taken
• Gauge height – gauge height read from external source
• Rated discharge – rated discharge acquired from external source
• Temperature – temperature acquired from external source
• Salinity – salinity acquired from external source
• Gauge height comments – any comments associated with gauge height or rated
discharge reading
Supplemental data can be added after the measurement is collected in Post-Processing.
Please refer to Section 14.9 for post-processing instructions.