Xylem SonTek FlowTracker2 - 14.3.3 Units Tab; 14.3.3.1 Changing Software Units

SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
242
Units Tab 14.3.3
Figure 14:7. Changing Units
Changing Software Units (Settings > Units) 14.3.3.1
The units displayed by the software for various parameters can be changed
independently. Table 14:1 summarizes the changeable parameters and what unit
options are available.
Table 14-1- Units Available for Software Parameters
Measurement
Unit Options
Angle
Degrees (deg), Radians (rad)
Area
Square feet (ft
2
), Square meters (m
2
)
Counts
Counts (cnts)
Depth
Centimeters (cm), Fathoms (fms), Feet (ft), Inches
(in), Kilometers (km), Meters (m), Miles (miles),
Millimeters (mm), Yards (yd)
Distance
Centimeters (cm), Fathoms (fms), Feet (ft), Inches
(in), Kilometers (km), Meters (m), Miles (miles),
Millimeters (mm), Yards (yd)
Flow
Acre feet per day (acre ft/day), Acre feet per hour
(acre ft/hour), Cubic feet per second (ft
3
/s), Cubic