Xylem SonTek FlowTracker2 - 14.4.5 New General Template; 14.4.6 Multiple Templates

SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
249
existing or new template upload to FlowTracker2 Handheld device, please refer to
Uploading and Downloading Templates.
New General Template (Utilities > New General Template) 14.4.5
To create a new General Template (template associated with General Mode
measurements), follow the same instructions in the previous section for creating a
Discharge Template.
Multiple Templates (Utilities > Multiple Templates) 14.4.6
Multiple Templates can be created in the handheld by performing a bulk import of
monitoring sites from a CSV file. The steps involved in creating a CSV file and multiple
templates are summarized below,
a) Create CSV Template
i). Open existing template from the
“View Data” button,
ii). Select “Save Template as CSV File”
feature,
iii). Save the CSV file to user defined
folder.
Figure 14:11 Save Template as CSV File
b) Populate Fields in CSV File
i). The headers supplied in the top row
of CSV file define parameters
required,
ii). Each row represents a different
monitoring site.
Figure 14:12 CSV File Format
c) Create Multiple Templates
i). Select the “Multiple Templates”
features in “Utilities”,
ii). Open CSV file created for Multiple
Templates,
iii). Set Input Units of CSV File to Create
Template Files dialog box displayed.
Figure 14:13 Set Input Units of CSV File
to Create Template Files