Xylem SonTek FlowTracker2 - Device Configuration Menu (Main Menu)

SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
25
Main menu consists of four menu options,
a) Device Configuration,
b) Utilities,
c) Communication,
d) System Information
e) To select a menu option,
i). Use up or down scroll arrows keys to select
menu option,
ii). The menu option selected will be highlighted in
yellow,
iii). Press the enter key to access the menu option.
Figure 2:5 - Main Menu
There are also two additional menu options “Data Files” and “Measurement” available to
the user that is situated in the bottom banner of the screen.
f) To select Data Files or Measurement functions,
i). Data Files – Press the Left Soft Key,
ii). Measurement – Press the Right Soft Key.
The number opposite each menu option is a shortcut key (i.e. pressing “2” key will
access the Utilities menu).
Device Configuration Menu (Main Menu) 2.5.1
The Device Configuration Menu configures how the FlowTracker2 collects data,
performs internal discharge calculations, evaluate data against data quality parameters
and finally determine uncertainty of the measurements based on the method selected.
Device Configuration menu consists of four menu
options,
a) User Interface,
b) Application Settings,
c) Discharge Templates,
d) General Templates.
e) To select a menu option,
i). Use up or down scroll arrows keys to select
menu option,
ii). The menu option selected will be highlighted in
yellow,
iii). Press the enter key to access the menu option.
f) To navigate to Main Menu,
i). Press the Left Soft Key.
Figure 2:6 - Device
Configuration Menu