Xylem SonTek FlowTracker2 - 14.8.2.8 Summary; 14.8.3 Settings Pane

SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
273
Summary 14.8.2.8
The Summary tab shows a comprehensive overview of the measurement. The
information presented in the other tabs and panes are summarized in this tab. Please
refer to other sections for descriptions of the specific values presented in this tab.
One feature in the Summary tab is the ability to export the measurement to a PDF file.
Please see Export Discharge Summary to PDF for details on how to use this function.
Settings Pane 14.8.3
The Settings pane contains general information about the site, the measurement, and
user input values. Much of this information is editable – please refer to Post-Processing
FlowTracker Measurements regarding how to edit these values. The information
presented in the Settings Pane is summarized in Table 14:5.
Table 14-5. Summary of Settings Pane Values
Category
Edit
Value
Description
Site Details
Site Name
Site name
Site Number
Site number
Operator(s)
Operators(s)
Comment
Comments
Station
Warning
Settings
Maximum station discharge
Maximum % discharge at
each station after which a
warning will be issued
Maximum depth change
Maximum % depth change
between consecutive stations
after which a warning will be
issued
Maximum spacing change
Maximum % spacing change
between consecutive stations
after which a warning will be
issued
Discharge
Settings
Discharge equation
Discharge equation used in
discharge calculation
(MidSection, MeanSection,
Japanese)
Discharge uncertainty
Discharge uncertainty
calculation used to calculate
uncertainty (Iso, Ive, None)
Discharge reference
Discharge reference
(Measured, Rated)
Data
Collection
Settings
Salinity
Salinity used in velocity
measurement
Temperature
Temperature used in velocity
measurement. If left blank,