SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
286
Figure 15:1 – Lab-ADV Feature of FlowTracker2 Desktop Software
15.2. Enable Lab-ADV feature
A license file is required to enable the Lab-ADV feature in a FlowTracker2 probe
assembly, where the license is specific to the probe assembly and is based on its serial
number. Each probe assembly that will be used with the desktop software Lab-ADV
feature will require the purchase of a license.
The Lab-ADV feature is enabled by uploading the license file into the FlowTracker2
Desktop Software. The upload of the license file can be performed from the Settings
menu under the General tab, shown in Figure 15:2.
To Next Page
Loading...