SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
209
Configuration_Discharge_Equation D
Discharge equation used for discharge calculation
in measurement section
Configuration_Discharge_Reference D
Specify type of external discharge used to
reference discharge measurement
Configuration_Discharge_Quality_Contro
l_Max_Station_Discharge_For_Warning
D Max station discharge for quality control process
Configuration_Discharge_Quality_Contro
l_Max_Depth_Change_For_Warning
D Max depth change for quality control process
Configuration_Discharge_Quality_Contro
l_Max_Spacing_Change_For_Warning
D Max spacing change for quality control process
Configuration_Discharge_Velocity_Meth
ods
D
Discharge velocity methods used in determining
mean velocity
The Raw Data file consists of the one second velocity, SNR and acceleration data with
date and time stamp. The variables exported in the raw data file are given in Table 12:4.
Table 12-4 - Raw Data File Variables
#
D, G
Burst or measurements number
VelZ
Signal-to-Noise Ratio beam 1
Signal-to-Noise Ratio beam 2
SNR3
Signal-to-Noise Ratio beam 3
Raw 1 second X acceleration
Raw 1 second Y acceleration
Raw 1 second Z acceleration
The Discharge file consists of system information, site details, quality control checks,
Beam Checks, uncertainty calculations, supplemental data and all station data related to
discharge measurement. The variables exported in the discharge file are given in Table
12:5.
Table 12-5 - Discharge File Variables
Desktop_Software_Build_Version
Version of desktop software
To Next Page
Loading...