SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
266
Stations 14.8.2.2
Figure 14:27. Layout of Stations Tab.
The Stations tab (Figure 14:27) shows detailed data for each station. The station in
active view is highlighted in blue. Clicking on a different station line will highlight that
station, and its available data will be displayed. Fields in the Station tab can be edited.
For details on how to edit various parameters, please refer to Section 14.9 . Plots/data
available are:
• Velocities – X,Y, (and Z, if using a 3D probe) velocities measured during a station
point measurement spanning chosen sampling period,
• SNR – mean beam SNR measured during a station point measurement spanning
chosen sampling period,
• Station information – Station information summary. Values displayed are
described in Table 14:4. The number of rows and columns that are viewable can
be changed by using the four arrows that appear above the station information
summary table in the software.
The continuous lines displayed in the graphics are defined under the following
categories,
i). Thin continuous line represents the one second raw data,
ii). Thick continuous line represents moving average of the one second raw data.
Table 14-4: Station Information Values Available
To Next Page
Loading...