Xylem SonTek FlowTracker2 - Page 268

SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
267
Edit
Orig. FT
FT2
Value
Description
Use Point
Indicates whether the station is used
in the discharge calculation. This
feature can be edited.
Station #
Station number
Location
Station location along tag line
Depth
Depth at each station (from user input
during measurement)
Fractional Depth
Fractional depth
Measurement
Depth
Actual measurement depth
Time
Time at start of station
Samples
Number of samples in station
Spike
Number of spikes during
measurement period
Velocity
Measured mean velocity
SNR
Mean SNR (all beams)
Velocity angle
Mean velocity angle with respect to
FlowTracker probe X axis
Velocity standard
error
Velocity standard error
Boundary
interference
Boundary interference quality
parameter (Best, Good, Fair, Poor)
Tilt
Mean Tilt
Correction factor
User entered correction factor
Width
Width of section
Area
Area of section
Mean velocity
Mean velocity calculated by dividing
discharge by area
Station
discharge
Station discharge
Temperature
Mean station temperature
Warnings
Warnings associated with each
station. Stations with warnings are
highlighted in yellow.
Comment
Comments from user input during
measurement
Station type
Station type (OpenWater, LeftBank,
RightBank, IslandEdge, Ice)
Velocity method
Velocity method used
GPS Latitude
GPS Latitude if GPS fix was recorded
GPS Longitude
GPS Longitude if GPS fix was
recorded
Altitude
GPS Altitude if GPS fix was recorded
Number of
GPS number of satellites if GPS fix