SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
285
FlowTracker2 Lab-ADV Section 15.
15.1. Lab-ADV Software Feature
The Lab-ADV feature is designed to work in conjunction with a Windows based
Computer or Tablet and a FlowTracker2 ADV probe assembly. A Power and
Communication Cable is required to connect the FlowTracker2 probe assembly to the
PC or Tablet. The Lab-ADV feature will enable users to perform the following functions
• Collect FlowTracker Data at different sampling rates,
• Generate CSV file of measured data,
• Perform Beam Check before measurement,
• Upgrade firmware FlowTracker2 probe,
A license file is required to enable the Lab-ADV feature for a FlowTracker2 probe
assembly, where the license is specific to the probe assembly and is based on its serial
number. Each probe assembly that will be used with the desktop software Lab-ADV
feature will require the purchase of a license.
The Lab-ADV feature can be accessed from the main menu of the FlowTracker2
Desktop Software shown in Figure 15:1.
To Next Page
Loading...