SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
252
c) Ensure that your computer Bluetooth radio (wireless communications) is turned
on.
d) Enter the full serial number of your FlowTracker2 device in the Input box that
appears (see Figure 14:16).
e) Click the Connect button. A dialog will appear with updates on the Bluetooth
connection status.
f) Once successfully connected, the FlowTracker2 data files will be listed, as shown
in Figure 14:17. The handheld will indicate that it is connected to your computer.
The FlowTracker2 software will remember different devices after they are first connected
using Bluetooth. To remove a device, open the Serial Number drop-down menu and
click “remove.”
Figure 14:16. Bluetooth Connection Dialog
14.6. Device Menu and Functions
Once connected with the FlowTracker2, there are a number of functions available that
allow you to download data and interact with the handheld device. These functions are
indicated in Figure 14:16 and are described below.
To Next Page
Loading...