Xylem SonTek FlowTracker2 - Go to Home Screen; Measurement Summary; Table 9:9 - Measurement Summary

SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
177
Go to Home Screen 9.3.4.7
The Go to Home Screen function will navigate the software to the main menu and the
user will have the ability to access software functions that are not related to General
Mode function.
The velocity measurements can be accessed during any stage by selecting the “Data
Collection” function with the Right Soft Key. The software will continue with the
measurement at the exact stage when the user navigated away from the general mode.
9.4. Measurement Summary
Measurement Summary is supplied when the Complete Measurement function is
selected and displays all the measurement results. The Measurement Summary is the
last verification of the measurement results before the measurement file is closed for any
further measurements or changes.
Measurement Summary screen consists of tabular
summary of velocity measurement results,
a) Velocity Summary, Table 9:9.
b) To CANCEL the general summary report,
i). Press the Left Soft Key.
ii). The software will navigate to the Data
Collection Window.
c) To COMPLETE the general measurement,
i). Press the Right Soft Key.
ii). The software will close the measurement file
and navigate to the main menu.
Figure 9:35 - Measurement
Summary
Properties associated with the variables and numerical calculations performed on the
raw data collected is defined in
Table 9:9,
Table 9-9 - Measurement Summary
Variable
Description
Units
Decimal
File Type
File type based on discharge or general mode
n/a
n/a
Site Name
Site name populated by user
n/a
n/a
Site Number
Site number populated by user
n/a
n/a
Operator
Operator name populated by user
n/a
n/a
Started
Start date and time when measurement was
created
yyyy-mm-dd hh:mm
Completed
End data and time when measurement was
completed
yyyy-mm-dd hh:mm
Stations
Total number of stations within the
measurement
n/a n/a