Xylem SonTek FlowTracker2 - 10.3. Cables and Connectors; 10.4. Certifications

SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
180
10.2. Handheld
The FlowTracker2 Handheld and internal sensors implemented specifications are listed
in Table 10:2,
Table 10-2- Handheld Specifications
Hardware
Specification
Battery
Power
Input Battery Voltage
8 - 12 VDC
Power
Supply
Alkaline
8 x size AA/LR6 Alkaline batteries
NiMH
8 x size AA, Panasonic, Type BK200AAB,
1.2Vdc, 1900mAh
The use of NiMH Rechargeable Batteries is only CE certified per
IEC 62133 for FlowTracker2 part number FT2-HH-2 and above.
Only this type of NiMH rechargeable batteries with IEC 62133
approvals can be used, or else safety protection will be void.
Battery
Life
8 x size AA
15 hours continuous use, typical settings*
*Defined as power on with screen on at 100% brightness,
ADV sensor pinging 50% of the time, GPS off, and no
sleep periods. Actual battery life will vary depending on
FT2 settings, manner of use and brand of battery.
Power Consumption
1 W (Average)
Direct Power
(ADV Lab
Probe only)
Power Supply POWER SUPPLY ASSY, 12V, 20W, 1.67A
Coin cell
Type
Coin Cell type is ML2020 Manganese
Lithium
GPS
Horizontal Position
Accuracy
<2.5m (8.2ft)
Frequency
L1 (1.575 MHz), SBAS compensation
(WAAS, EGNOS, MSAS, GAGAN)
LCD
Resolution
320 X 240 TFT Trans missive
LED Backlight
Luminance
450 cd / m2
Probe
Interface
Battery Power to Probe
8 - 12 VDC
Direct Power to Probe
12 VDC
Data Transfer
RS-232
Data Storage
16 GB. Up to 10k discharge measurements.
Up to 10 million velocity samples
Physical
Specifications
Waterproof Rating
IP-67 (1m submersible)
Handheld Dimensions
(L)10.4cm (4.1in); (W) 6.4cm (2.5in); (H)
23.7cm (9.3in)
Weight in Air
0.75kg (1.65lbs)
Weight in Water
-0.25kg (-0.55lbs)
Operating
Altitude
Maximum operating altitude is 2000m