SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
257
To upload an existing template from your computer to the FlowTracker2, click
Templates > Upload to Device, and select the appropriate .ft_template file. The template
file will be added to the list of templates on your device that appears.
Templates can be either created on the Handheld device and modified on a computer, or
created through the desktop software and uploaded to the device. Please refer to New
Discharge Template for instructions on how to create a template file using the software.
Please refer to Opening FlowTracker2 Template Files (.ft_template) for instructions on
opening and editing template files.
Custom Localization 14.6.5
Custom Localization allows a user to import Language files onto the handheld device.
Please see Run Translator for instructions on creating a Language file (.lang).
Disconnecting the FlowTracker2 14.6.6
To disconnect the FlowTracker2 from the computer, click the Disconnect button.
14.7. Opening a Data File
To view FlowTracker data files, click the View Data button to turn View Data on. The
first time this button is clicked, a dialog will appear to select a file. To open more files,
click the ‘+’ tab shown in Figure 14:20. The Open File dialog (Figure 14:21) will appear.
The FlowTracker2 software is capable of opening the following file types:
• FlowTracker File (.ft)
• FlowTracker Beamcheck File (.ft_beamcheck)
• FlowTracker Template File (.ft_template)
To Next Page
Loading...