Xylem SonTek FlowTracker2 - Power and Communication Cable; Table 15:3. Flowtracker2 Lab-Adv Hardware Components

SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
296
Variable
Description
Units
Decimal
Accelerometer.X
Raw X acceleration
5
Accelerometer.Y
Raw Y acceleration
5
Accelerometer.Z
Raw Z acceleration
5
15.6. Power and Communication Cable
The Power and Communication Cable connects the FlowTracker2 probe assembly to the
power supply and Windows PC or Tablet. The hardware components associated with
the FlowTracker2 Lab-AdV application are listed in Table 15:3.
Table 15-3. FlowTracker2 Lab-Adv Hardware Components
Component
Description
2D side-looking 10 MHz
ADV probe assembly
FlowTracker2 2D side-looking 10
MHz ADV probe assembly
2D/3D side-looking 10 MHz
ADV probe assembly
FlowTracker2 2D/3D side-looking
10 MHz ADV probe assembly
FlowTracker2 probe
assembly sensor extension
cable
The FlowTracker2 probe
assembly extension cables are
available in three different
lengths.
• 1.5m,
• 3.5m,
• 8.5m.
It is recommended that the maximum extension cable
length of 8.5m not be exceeded, for a total cable length
of 10m.