SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
151
Confirmation screen of Complete Measurement
function confirms if the user wants to close the
measurement file. User will not be able to add
stations or make any changes to the data
c) To confirm complete measurement operation,
ii). Press the Right Soft Key.
d) To CANCEL complete measurement operation,
ii). Press the Left Soft Key.
Figure 8:47 - Confirmation
Confirmation screen with Quality Control warning
messages based on quality control checks performed
on measurement data.
c) To accept quality control warning messages,
ii). Press the Right Soft Key.
d) To CANCEL complete measurement operation,
ii). Press the Left Soft Key.
Figure 8:48 - Confirmation
Summary screen displays the discharge summary
report before the measurement file is closed for
further data entry and editing.
a) To confirm complete measurement operation,
i). Press the Right Soft Key.
ii). The software will navigate to the Main Menu.
b) To CANCEL complete measurement operation,
i). Press the Left Soft Key.
Figure 8:49 - Summary
Discard Measurement 8.3.5.8
The Discard Measurement function will discard all configuration settings, stations and
other data related with the measurement.
Discarding a measurement will result in deleting all data of the measurement site that is
related to the specific measurement file.
To Next Page
Loading...