Xylem SonTek FlowTracker2 - Section 9. General Measurement; 9.1. Create Measurement

SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
153
Table 8-14 - Measurement Summary
Variable
Description
Units
Decimal
File Type
File type based on discharge or general mode
n/a
n/a
Site Name
Site name populated by user
n/a
n/a
Site Number
Site number populated by user
n/a
n/a
Operator
Operator name populated by user
n/a
n/a
Started
Start date and time when measurement was
created
yyyy-mm-dd hh:mm
Completed
End data and time when measurement was
completed
yyyy-mm-dd hh:mm
Stations
Total number of stations within the
measurement
n/a n/a
Comment
General comment captured against
measurement
n/a n/a
Discharge
Total discharge calculated
m
3
/s or ft
3
/s
4
Rated Q
Rated discharge entered by user
m
3
/s or ft
3
/s
4
Width
Total width of the measurement section
m or ft
3
Mean Depth
The mean depth of the measurement section
calculated from the total area and width.
m or ft
3
Area
Total area of the measurement section
m
2
or ft
2
4
Mean SNR
Average signal to noise ration
dB
Temp
Average temperature measured
°C or °F
Vel Mean
Average station velocity, X velocity component
m/s or ft/s
4
Vel Min
Minimum station velocity, X velocity
component
m/s or ft/s 4
Vel Max
Maximum station velocity, X velocity
component
m/s or ft/s 4
Height, Start
First staff gauge reading
m or ft
3
Height, End
Last staff gauge reading
m or ft
3
Uncertainty
Uncertainty in discharge measurement
%
2
Largest
Uncertainty
Largest uncertainty in the discharge
uncertainty calculation
% 2
GPS -
Latitude
GPS derived Latitude
DDD° MM' SS.SS
GPS -
Longitude
GPS derived Longitude
DDD° MM' SS.SS