SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
68
Warning screen of Force Probe Upgrade function
displays the warnings associated with downgrading
probe firmware,
a) To CANCEL force probe upgrade,
i). Press the Left Soft Key.
b) To continue with force probe upgrade,
i). Press the Right Soft Key.
Figure 4:14 – Force Probe
Upgrade Warning
In case where the probe firmware version is newer than the firmware installed on the
handheld, the handheld will supply a warning message before each velocity
measurement is performed: “The Probe firmware is newer than expected – please
consider upgrading the Handheld firmware to the latest version available”
To Next Page
Loading...