Yamaha Mio - Removing the Primary Sheave

4 - 47
ENG
BELT DRIVE
5. Remove:
• secondary sheave 1
• V-belt 2
NOTE:
_
Pull the secondary sliding sheave out as
shown, remove the V-belt along with the sec-
ondary sheave 1, and then remove the V-belt
2 from the primary sheave.
2
1
6. Remove:
• gasket 1
1
EASF0031
REMOVING THE PRIMARY SHEAVE
1. Remove:
• primary sheave nut 1
• conical spring washer
• kickstarter one-way clutch
• claw washer
• primary fixed sheave 2
• washer
• primary sliding sheave
NOTE:
_
While holding the primary fixed sheave with
the sheave holder 3, loosen the primary
sheave nut.
Sheave holder
90890-01701
1
2
3