Yamaha Mio - Removing the Handlebar

6 - 40
CHAS
HANDLEBAR
EAS00666
REMOVING THE HANDLEBAR
1. Stand the motorcycle on a level surface.
WARNING
_
Securely support the motorcycle so that
there is no danger of it falling over.
2. Remove:
• leg shield
Refer to “REMOVING THE FRONT COWL-
ING AND LEG SHIELD” in chapter 3.
3. Remove:
• headlight assembly
Refer to “REMOVING THE HEADLIGHT
ASSEMBLY” in chapter 3.
4. Remove:
• brake master cylinder assembly
Refer to “FRONT BRAKE”.
5. Remove:
• throttle cable housing (rear side)
1
6. Remove:
• throttle cable
1
• throttle grip
2
• throttle cable housing (front side)
3
7. Remove:
• handlebar grip
1
NOTE:
_
Blow compressed air between the handlebar
and the handlebar grip, and gradually push the
grip off the handlebar.
1