Yamaha Mio - Disassembling the Secondary Sheave

4 - 48
ENG
BELT DRIVE
2. Remove:
• plastic slider guides 1
• slider 2
• primary sheave weights 3
• spacer 4
• oil seals
3
3
3
1
2
1
1
4
EAS00319
DISASSEMBLING THE SECONDARY
SHEAVE
1. Remove:
• clutch carrier nut 1
NOTE:
_
Install the clutch spring holder 2 onto the sec-
ondary sheave as shown. Then, compress the
spring, and remove the clutch carrier nut.
Clutch spring holder
90890-01337
2
1
2. Remove:
• spring seat
3. Remove:
• guide pins 1
• secondary sliding sheave
• secondary fixed sheave
1