Yamaha Mio - Installing the Front Wheel

6 - 7
CHAS
FRONT WHEEL AND BRAKE DISC
EAS00542
INSTALLING THE FRONT WHEEL
1. Lubricate:
• wheel axle
• wheel bearings
• oil seal lips
• speedometer gear unit
Recommended lubricant
Lithium-soap-based grease
2. Install:
• speedometer gear unit
1
NOTE:
_
• Make sure that the speedometer gear unit
and the wheel hub are installed with the pro-
jection
a
of the wheel hub inserted in a slot
b
of the speedometer gear unit.
• When installing the speedometer gear unit,
make sure that the projection on the wheel
hub does not damage the lip of the speed-
ometer gear unit oil seal.
3. Install:
• brake disc
Refer to “CHECKING THE BRAKE DISC”.
4. Install:
• speedometer gear unit
• spacer
• front wheel
• front wheel axle
• washer
NOTE:
_
Make sure the projection
a
on the speedome-
ter gear unit fits over the stopper on the outer
tube.