Yamaha Mio - Installing the Steering Head

6 - 48
CHAS
STEERING HEAD
EAS00683
INSTALLING THE STEERING HEAD
For installation, reverse the removal proce-
dure.
1. Lubricate:
• upper bearing
• lower bearing
• bearing races
2. Install:
• upper bearing
1
• lower bearing
2
NOTE:
_
Install the upper and lower bearings with the
projection
a
on each bearing facing up.
3. Install:
• lower ring nut
• upper ring nut
Refer to “CHECKING AND ADJUSTING
THE STEERING HEAD” in chapter 3.
4. Install:
• speedometer cable guide
• brake hose holder bracket
Recommended lubricant
Lithium-soap-based grease
T
R
.
.
7 Nm (0.7 m · kg, 5.1 ft · lb)
T
R
.
.
7 Nm (0.7 m · kg, 5.1 ft · lb)