Yamaha Mio - Changing the Transmission Oil

3 - 18
CHK
ADJ
CHANGING THE ENGINE OIL/
CHANGING THE TRANSMISSION OIL
8. Fill:
• crankcase
(with the specified amount of the recom-
mended engine oil)
9. Install:
• dipstick
10.Start the engine, warm it up for several min-
utes, and then turn it off.
11.Check:
• engine
(for engine oil leaks)
12.Check:
• engine oil level
Refer to “CHECKING THE ENGINE OIL
LEVEL”.
Quantity
Total amount
0.9 L (0.79 Imp qt, 0.95 US qt)
Periodic replacement
0.8 L (0.70 Imp qt, 0.85 US qt)
CHANGING THE TRANSMISSION OIL
1. Start the engine, warm it up for several min-
utes, and then turn it off.
2. Place a container under the transmission oil
drain bolt.
3. Remove:
• transmission oil filler plug 1
• transmission oil drain bolt 2
(along with the gasket)
4. Drain:
• transmission oil
(completely from the transmission case)
5. Check:
• transmission oil drain bolt gasket
Damage → Replace.
6. Install:
• transmission oil drain bolt
(along with the gasket)
1
2
T
R
.
.
22 Nm (2.2 m · kg, 16 ft · lb)