1 - 6
GEN
INFO
SPECIAL TOOLS
90890-01311
Tappet adjusting tool
This tool is necessary for adjusting
valve clearance.
90890-01312
Fuel level gauge
This gauge is used to measure the fuel
level in the float chamber.
90890-01326
T-handle
This tool is used for holding the damper
rod holder when removing or installing
the damper rod holder.
90890-01337
Clutch spring holder
This tool is used to disassembly and
assembly the secondary sheave.
90890-01384
Oil seal guide
This tool is used to install oil seals.
90890-01403
Steering nut wrench
This tool is used to loosen and tighten
the steering ring nut.
90890-01493
Socket wrench
This tool is used to loosen and tighten
the clutch carrier locknut of the second-
ary sheave.
90890-01701
Sheave holder
This tool is used for holding the primary
sheave and secondary sheave.
Tool No. Tool name/Usage Illustration
To Next Page
Loading...
