4 - 70
ENG
TRANSMISSION
EASF0042
REMOVING THE TRANSMISSION
NOTE:
_
Prior to remove the transmission, remove the
muffler, rear wheel and secondary sheave.
1. Drain:
• transmission oil
(completely from the transmission case)
Refer to “CHANGING THE TRANSMIS-
SION OIL” in chapter 3.
2. Remove:
• transmission case cover
1
(with primary drive gear, bearings)
• gasket
• dowel pins
1
3. Remove:
• oil seal
1
• circlip
2
2
1
4. Remove:
• primary drive gear 1
• retainer bolt 2
• primary drive gear bearing 3
1
3
2
5. Remove:
• washer 1
• conical spring washer
• drive axle gear 2
• conical spring washer
• main axle 3
2
3
1
To Next Page