7 - 39
– +
ELEC
SIGNALING SYSTEM
C0NTINUITY
HORN IS NOT
SOUNDED
3.Horn
●
Disconnect the “Pink” lead at the horn ter-
minal.
●
Connect a jumper lead
1
to the horn termi-
nal and ground the jumper lead.
●
Turn the main switch to “ON”.
*
HORN IS SOUNDED
Horn is good.
MEETS SPECIFI-
CATION (12 V)
4.Voltage
●
Connect the pocket tester (DC 20 V) to the
horn at the Pink terminal.
Tester (+) lead
→
Pink
1
lead
Tester (–) lead
→
Frame ground
●
Turn the main switch to “ON”.
●
Check for voltage (12 V) on the “Pink” lead
at the horn terminal.
Adjust or replace horn.
OUT OF SPECIFICATION
Horn is faulty, replace it.
To Next Page
