10-12
10
OTHER OPERATIONS
10-4 SERVICE mode function
7) When writing is complete, the screen returns
to step 6.
[SYS-SAFE-SVCE-SET]
SERVICE mode = 1
0:Invalid 1:Valid
n
NOTE
The password is identical to the DRCX controller's version number. For example, if the controller version is 18.11,
enter 18.11 as the password. Once the password is accepted, it will not be requested unless the TPB is disconnected
from the controller or the controller power is turned off.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
