YASKAWA FS100 - Page 45

2 INFORM Explanation
FS100 2.1 I/O Instructions : ANTOUT
2-22
1. AT# (Anticipation output number) / AG# (Anticipa-
tion group output number)
Choose one of the tags from the following table.
Construction
ANTOUT AT# (
Anticipation
output No.
)
AG# (
Anticipation
group output
No.
)
ON/OFF
B/LB/B[]/
LB[]
Variable No.
Byte type
constant
1
2
3
4
5
A
END
A
ANT=
Anticipation
time (s)
6
Explanation
No. Tag Explanation Note
1 AT# (Anticipation
output number)
Specifies the number of the signal whose timing is
adjusted.
No.: 1 to 32
Variable B/I/D/LB/LI/LD
can be used.
2 AG# (Anticipation
group output number)
Specifies the group number of the signal whose
timing is adjusted.
No.: 1 or 16
Variable B/I/D/LB/LI/LD
can be used.