YASKAWA G7 Series User Manual

6-150
Related Parameters
Parameter
Number
Name Description
Setting
Range
Factory
Setting
Change
during
Operation
Control Methods
V/f
V/f
with
PG
Open
Loop
Vector
1
Flux
Vector
Open
Loop
Vector
2
A2-01 to
A2-32
User setting
parameters
Used to set the parameter
numbers that can be set/read.
Maximum 32.
Effective when the Parameter
Access Level (A1-01) is set to
User Program (1). Parameters set
in parameters A2-01 to A2-32 can
be set/read in programming mode.
b1-01
to
o3-02
- NoAAAAA
User Param 1
to 32
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

YASKAWA G7 Series Specifications

General

Series	G7
Frequency	50/60 Hz
Output Voltage	Matches Input Voltage
Control Method	V/f Control
Overload Capacity	150% for 60 seconds
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit
Communication	RS-485, Modbus, DeviceNet, Profibus, Ethernet
Safety	Safe Torque Off (STO)
Operating Temperature	-10°C to 50°C
Humidity	5% to 95% (non-condensing)
Cooling Method	Fan Cooled
Enclosure Rating	IP20
Storage Temperature	-20°C to 65°C