YASKAWA G7 Series User Manual

9-6
The following Option Cards are available
Table 9.5 Option Cards
Type Name
Code
Number
Function
Document
Number
Built-in
(con-
nect
to con-
nector)
Speed
(Fre-
quency)
Refer-
ence
Option
Cards
Analog
Reference
Card
AI-14U
73600-
C001X
Enables high-precision, high-resolution setting of analog
speed references.
• Input signal ranges: 0 to 10 V (20 kΩ), 1 channel
4 to 20 mA (250 Ω), 1 channel
• Input resolution: 14-bit (1/16384)
-
Analog
Reference
Card
AI-14B
73600-
C002X
Enables high-precision, high-resolution setting of analog
speed references.
• Input signal ranges: 0 to ±10 V (20 kΩ)
4 to 20 mA (500 Ω), 3 channels
• Input resolution: 13-bit + sign (1/8192)
-
Digital
Reference
Card
DI-08
73600-
C003X
Enables 8-bit digital setting of speed references.
• Input signal: 8-bit binary
2-digit BCD + sign signal + set signal
• Input voltage: +24 V (isolated)
• Input current: 8 mA
-
Digital
Reference
Card
DI-16H2
73600-
C016X
Enables 16-bit digital setting of speed references.
• Input signal: 16-bit binary
4-digit BCD + sign signal + set signal
• Input voltage: +24 V (isolated)
• Input current: 8 mA
With 16-bit/12-bit switch.
-
Moni-
toring
Optional
Cards
Analog
Monitor Card
AO-08
73600-
D001X
Converts analog signals to monitor the Drive's output status
(output frequency, output current, etc.) to absolute values and
outputs them.
• Output resolution: 8 bits (1/256)
• Output voltage: 0 to +10 V (not insulated)
• Output channels: 2 channels
-
Analog
Monitor Card
AO-12
73600-
D002X
Output analog signals to monitor the Drive's output status
(output frequency, output current, etc.).
• Output resolution: 11 bits (1/2048) + sign
• Output voltage: -10 to +10 V (not insulated)
• Output channels: 2 channels
-
Digital
Output Card
DO-08
73600-
D004X
Outputs isolated digital signals to monitor the Drives operat-
ing status (alarm signals, zero speed detection, etc.)
Output form: Photocoupler output, 6 channels
(48 V, 50 mA max.)
Relay contact outputs, 2 channels
(250 Vac: 1 A max., 30Vdc: 1 A max.)
-
2C-Relay
Output Card
DO-02C
73600-
D007X
Provides two multi-function outputs (DPDT relay contacts) in
addition to those provided by the Drive.
-
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

YASKAWA G7 Series Specifications

General

Series	G7
Frequency	50/60 Hz
Output Voltage	Matches Input Voltage
Control Method	V/f Control
Overload Capacity	150% for 60 seconds
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit
Communication	RS-485, Modbus, DeviceNet, Profibus, Ethernet
Safety	Safe Torque Off (STO)
Operating Temperature	-10°C to 50°C
Humidity	5% to 95% (non-condensing)
Cooling Method	Fan Cooled
Enclosure Rating	IP20
Storage Temperature	-20°C to 65°C